Page 7 - Annual report eng 2020

Tycoons Worldwide Group (Thailand) Plc.

Based on the figures above, domestic sales generally accounted for a greater proportion
of TYCN’s total sales than international sales over period from 2018 through 2020,
Nonetheless, the relative proportions of wire rod (including reinforcing bar) are mainly
sold in the domestic and foreign markets are annealed wire and fastener. Wire rod
comprised the largest proportion of sales in 2020, accounting for about 63.72%.

The primary markets for screw in 2020 were the America, Poland and Romania. The
primary markets for annealing wire in 2020 is Taiwan. The primary markets for bolt were
Germany and England.

2.1 Products

2.1.1 Wire Rods

2.1.1.1 Wire Rods in Coil:
Wire rods in coil, with outer diameter 1250mm and inner diameter 850mm,
are made of billets through the process of hot rolling to bars (diameter from
5.5mm to16mm), coiling and strapping.

2.1.1.2 Bars in Coil:
Bars in coil, also named as BIC, with outer diameter 1400mm and inner
diameter 1100mm, are made of billets through the process of hot rolling to
bars (diameter from 17mm to 42mm), coiling and strapping.
The company produces low-carbon wire rods in accordance with TISI
no.348- 2540, while produces high-carbon wire rods in accordance with
TISI no.349-2561.

2.1.2 Reinforcing bars

2.1.2.1 Deformed Bars
Deformed Bars are the product with transverse ribs, longitudinal ribs or gaps
on its surfaces, which reinforce the pull strength between deformed bars and
concrete. Specifications of Deformed bar product are DB10, DB12, DB16,
DB20 and DB25 under Thai SD40 & SD50. Straight deformed bars, with
diameter from 10mm to 12mm, are made of billets through hot rolling and
flying shears.

2.1.2.2 Round Bars
Round bars are made of bars with smooth surface through coiling and
strapping. (Specifications are RB6-RB25).

2.1.3 Annealed Wires

Annealed wires are either finished or semi-finished products which are made of
wire rods through complete or partial processes of intermediate drawing,
spheroidizing, pickling and coating, and skin-pass. Annealed wires are classified
into:

4